Skip to main content

Manual

Datalogic Joya Touch A6

Device preparation instructions:

  1. Unpack device

  2. Unscrew handle, install the battery and reattach handle with screws

  3. If not started automatically, start the device by pressing long on the trigger, or the push button under the screen

  4. Connect to available Wifi > standard Android functionality > drag menu from top

  5. Go to Settings:

    1. Display > When device is rotated: set to "Stay in current orientation" (Note: this is a lock function on current orientation, so make sure the orientation is correct - portrait - before changing the setting

    2. Date > Time > Select time zone: set to appropriate time zone (if required)

      1. If required, activate "Use 24-hour format" toggle

    3. (optional) Language and input settings allow change of device language and keyboard

    4. Scanner settings:

      1. Notification > Disable "Enable display notification"

      2. Formatting > Check "Label suffix" > must be on "LF"

      3. Activate the following symbologies (other standards are already active)

        • Code 93

        • Interleaved 2 of 5

        • Additional setting: Length control > No check

        • EAN-13

        • enable "Send checksum"

      4. Wedge

        • Enable keyboard wedge

        • Disable "Keyboard wedge only on focus"

      5. Commit settings (bottom item in the Scanner settings menu)

    5. Advanced settings > Configure wake up sources > Activate Motion (this will also wake up the device when it is picked up)

  6. Download and install TeamViewer Quicksupport Android  through native browser: https://www.teamviewer.com/en/download/mobile-apps/

    1. Note: when trying to install the apk, the device will prompt that installation is not allowed due to an untrusted source. Tap through to toggle the setting "Allow untrusted sources" > Use the "Amaze app" to access the file system and launch the apk from the Downloads folder

    2. Test Teamviewer connection

      Note

      TeamViewer is not able to control remotely - only screen sharing is supported. Using screen-sharing, the support operator can point to locations on screen for the user to go to.

    3. Place TeamViewer on the main screen of the device

  7. Clear any apps from the Start screen so that only Admission and TeamViewer

  8. Install Admission app

    1. File transfer through TeamViewer or connect with phone USB cable to PC > Place in External Storage\Download

    2. Use the "Amaze app" to access the file system and launch the .apk file from the Downloads folder

  9. Launch Admission app & configure connection strings

Additional settings (optional)

Scanner settings > set audio notification (beep).

This will make that scanner will beep on successful decode. In the Admission app, sound can then also be activated if required, in order to get an additional beep on successful ticket validation.

In this section: